4K prevodník videa TVI/AHD/CVI to HDMI & VGA & CVBS AHD1509 II

Popis

Toto zariadenie slúži na prevod TVI/AHD/CVI video signálu na VGA a HDMI, prípadne kompozitné analógové video CVBS. Podporuje PAL aj NTSC, rozlíšenie vstupu aj výstupu až 1920x1080 @60Hz. Ide o plug and play zariadenie a jeho použitie je tak veľmi jednoduché. Tento prevodník je vhodný na sledovanie obrazu z kamier AHD na televíznom prijímači vybavenom vstupom HDMI/VGA.

Vlastnosti (aktuálne dodávame model TI-ACT4K)

• podpora TVI/AHD/CVI 8MPx/5MPx, 4Mpx1080p/960p/720p vstupu
• zabudovaná funkcia 3D NR - 3D redukcia šumu
• prevod obrazu bez oneskorenia v obraze, REAL TIME
• výborná kompatibilita : CVBS výstup kompatibilný so staršími rekordérmi D1/960H a ostatnými staršími komponentmi* high integration
• HDMI kompatibilné DVI : 800X600, 1024X768, 1280X1024, 1360X768, 1680X1050, 1920X1080@50_60Hz etc.
• video system: NTSC / PAL (automatická detekcia)
• výstup HDMI(720P@60Hz/1080p@60hz)
• podpora AHD signálu do vzdialenosti 500m
• CE, FCC, RoHS certifikácia

Špecifikácia od výrobcu

Overview

This converter can convert a HD signal (Analog high definition) to HDMI signal with a HD loop out. HD TVI/CVI camera can connect to a HDMI monitor directly. This enables High Definition video viewed without going through a DVR. To ensure you maintain perfect high-definition video quality, the converter resolution up to 1080p, allowing you to convert a HD Analog to HDMI without sacrificing video quality for hassle-free installation, the converter offers a plug-and-play solution and requires no software or driver installation.

Instruction

1.   Power connection

The device uses 5V 1A power supply, connected to the power can be used normally, power indicator light.

2.   Functions Introduction

1) CVI+CVBS to HDMI, HDMI output 1080P, connect HDMI output cable, HD-LINK light, display yellow light.

2) Support up to CVI 8MP test.

3) One channel CVI/CVBS loop out.

4) Auto recognition 720P/1080P/3MP/4MP/5MP/8MP resolution, indicator visual display.

3.   75Ω HI-Z Impedance switch

When the IN port of the converter is connected to the camera, and the OUT is not connected to the DVR, please set the impedance switch to 75Ω. When the IN port of the converter is connected to the camera and the OUT port is connected to the DVR, please set to HI-Z.

Tabuľka podporovaných rozlíšení

​​​​1. CVI supported resolution table

*Remarks: Just can choose one of CVI.(different models support different resolutions)